Shadowclad® Ultra Texture
Shadowclad® Ultra Texture combines the look and versatility of traditional Natural Shadowclad products with the time and cost saving benefits of a pre-primed cladding. The primer formulation creates a more consistent and dependable undercoat that's perfect for immediate on-site top coating. The Shadowclad Ultra Texture product features a solid band-sawn face profile.
The product is suitable as an exterior cladding and is available in two treatment options: H3.1 LOSP or H3.2 CCA.
The primed product has a high 60-80 microns film build, and can be up to 2 to 3 times thicker than traditional wet primers.
Features & Benefits
- Manufactured from sustainably-grown NZ plantation pine
- Range of sheet sizes, profiles and finishes for wide design flexibility
- Compliant with NZ Building Code requirements
- Vertical shiplap joints for easy and watertight installation
- Low formaldehyde emission (E0)
- FSC® certified (FSC-C012019) upon request
- Band-sawn sheet surface provides a compelling tactile finish
- Shadowclad exterior cladding system includes a wide range of purpose designed exterior flashings
- Shadowclad installation guidelines must be followed. Please refer to the current Shadowclad Specification and Installation Guide
Shadowclad is manufactured to meet the requirements of the NZBC Clause B2 Durability. When treated to the required treatment levels prescribed in NZS 3602, it will form part of an Acceptable Solution complying with the requirements of the NZBC (Acceptable Solution B2/AS1, 3.2.1).
NZBC Clause B2 requires claddings which do not form part of bracing to achieve a minimum structural durability level of 15 years.
For Specification and Installation Guides and further information on Cavity Construction click the link below:
BRANZ appraisal for Shadowclad on a ventilated cavity.
This information bulletin has been created to provide further guidance to building owners about the minimum maintenance requirements for Shadowclad products.
This information bulletin has been created to provide guidance to building owners about the general repair and replacement of Shadowclad products. It is not intended as a complete installation guide, or a substitute for professional advice.
Where additions and/or alterations to the building are made that will affect the structural stability of the building, the weathertightness of an elevation, fire safety or other circumstances identified in Schedule 1 of the New Zealand Building Act 2004 a building consent will be required.
This information bulletin discusses the reasons for CHH Plywood’s updated advice to specifiers and homeowners that Shadowclad cladding for new builds should only be used over a drained and ventilated cavity.
Shadowclad Vertical Sheet Joint Groove Profile
Shadowclad Horizontal Continuous Flashing
Shadowclad Mid Floor Horizontal Joint
Shadowclad Vertical Sheet Joint Texture Profile
Shadowclad External Corner Box Flashings
Shadowclad Window Jamb
Shadowclad Overhangs & Ground Clearances
Shadowclad Window jamb & sill
Shadowclad Window Top Flashing
Shadowclad Internal Corner 'W' Flashing
Shadowclad Flashing Junctions & Connections with Horizontal & Back Flashing
Shadowclad External Corner with Cover Boards
The information in this guide relates to Shadowclad plywood Mixed Cladding Installation for Cavity Construction.
The information in this guide relates to Shadowclad plywood cladding installation for Cavity Construction.